|
Post by Frisbone on Jan 16, 2014 20:45:33 GMT -5
The 400Kbps fast-mode operation is supported by the BCM (RPi Broadcom chip), the AM (MMA8452Q), and the PWM device (PCA9685). Since you indicated that the DAC also supports it we are probably safe bumping it up once we figure out how to properly configure it on each.
The PWM chip actually supports 1Mbps called Fast-Mode Plus - but nothing else does - so doesn't matter.
Just FYI.
|
|
|
Post by lintball on Jan 20, 2014 21:25:14 GMT -5
Cool, I'll double check that DAC doc to see how to do it with that.
|
|
|
Post by lintball on Jan 20, 2014 22:13:58 GMT -5
Looking at the DAC doc(page 27)...It supports "Fast Mode" up to 400 kbits/s and also "High Speed Mode" up to 3.4 Mbit/s
|
|